TURBINE
OIL
DESCRIPTION
Premium quality inhibited turbine oil. Contains highly
effective rust, oxidation and foam inhibitors and is formulated
to provide good air release properties.
PERFORMANCE
STANDARDS
Meets the requirements of British Standard BS489:1983(grades
32 through 68) and German Standard DIN 51515 Part 1. Also
meets the gear oil requirements of David Brown Table M.
CUSTOMER BENEFITS
 Long
service life assured by outstanding oxidation resistance.
Maintains
high power output by resisting air entrainment in oil
circulation.
Allows
easy removal of water.
Protects
against rust.
Allows
one oil to be used for both turbine and non-turbine applications.
TYPICAL APPLICATIONS
Recommended
for use in the lubrication systems of mineral-oil-lulricated
steam and hydraulic turbines operating under all service
conditions. Also for use in industrial-type gas turbines
under moderate service where the oil is not exposed to
high temperatures.
Suitable
for use in air compressors, bath and circulating systems
supplying bearings of all types, lightly loaded gear sets,
pumps, electric motors and low to moderate-pressure hydraulic
systems where antiwear or other special properties are
not required.
KEY PROPERTIES
| ISO Grade |
32
|
46 |
68
|
100
|
| Density, kg/liter
@15¢ªC |
0.862
|
0.872
|
0.876
|
0.886
|
| Kinematic Viscosity,mm2/s@40¢ªC |
31.1 |
43.5 |
61.5 |
93.5 |
| Kinematic Viscosity,mm2/s@100¢ªC
|
5.5 |
6.8 |
8.9 |
11.2 |
| Viscosity Index |
116 |
114 |
110 |
106 |
| Pour Point,¢ªC |
-18 |
-15 |
-15 |
-12 |
| Flash Point,COC,¢ªC |
212 |
224 |
234 |
254 |
| Oxidation Stability |
|
|
|
|
| - D943, Hrs to 2.0
Acid NO. |
3000 |
3000 |
2700 |
2500 |
| - IP 280(TOP), mass% |
0.24 |
0.26 |
0.27 |
0.28 |
|
| |
|
